The Best Capabilities for
the Best Solutions to Meet Your Power Needs.
Enercon is a full-service support company specializing in electrical controls and critical power generation. We have a highly skilled team of engineers, fabricators, and testers dedicated to ensuring that our products meet the highest quality and safety standards. Our UL891 / UL1558 switchgear, switchboards, power packages, and UL508A / UL698A control panels are all fabricated in-house, which allows us to closely monitor every step of the manufacturing process. This attention to detail ensures that our products meet or exceed our customers' expectations. In addition, our in-house testing facilities allow us to thoroughly test our products before they are shipped to our customers. As a result, Enercon can provide its customers with the highest level of support and satisfaction.
Capabilities Statement
Enercon is a trusted resource for engineering and manufacturing customized power solutions. For over four decades, we have helped our military, government, industrial, commercial, municipal, and international customers overcome their critical power challenges.
With over 50,000 projects completed and deployed worldwide in110 countries; our solutions are specifically designed to ensure operational security and energy optimization in any environment.
Core Competencies
-
Power Integration Solutions
-
Custom Electrical Design Solutions
-
Programmable Logic Controller (PLC)
-
Switchgear and Controls Manufacturing
-
Complete In-house Testing Services
-
Power Upgrades and Retro-fits
-
Industrial Control Panels
-
Full Support Team of Field Engineers and Technicians
-
Rapid Power Solutions Manufacturing
Technical Expertise
Integration:
-
Maximized Space Claim
-
Product Weight Reduction
-
Solutions up to 100 Tons
-
Transport Requirements
-
Thermal Management
-
Airflow Management
-
Shelter Systems
Electrical:
-
Up to 15kV Electrical Systems
-
SCADA Systems
-
PLC Systems
-
HMI Systems
-
System Safety
-
Testing
-
Field Support
Environmental:
-
CBRN Resistant Coatings
-
Extreme Temperatures (-40°C — +50°C)
-
Saline Atmospheres
-
High Altitude
Tactical Threat Mitigation:
-
Electromagnetic Interference
-
Nuclear, Biological, Radiological and Chemical
-
Fault Detection & Isolation
Critical Resource Expertise
Energy Capabilities:
-
Generation up to 2.5MW
-
Power Distribution
-
Energy Control Systems
-
Electrical Assemblies
-
Air Conditioning Systems
Fuel Capabilities:
-
Renewable Energy
-
Multi-Fuel Generation
-
Engine Efficiency
-
Combined Heat & Power
Water Capabilities:
-
Reclamation
-
Odor Control
-
Reverse Osmosis
-
Shelter Water Solutions
Facilities
-
160,000 sq.ft. of Manufacturing Space
-
50,000 sq.ft. Electrical Assembly Area with Designated Production Lines
-
Business Development Office in Huntsville, AL
-
Fully Equipped Fabrication Shop
-
Paint Booth
-
On-site Electrical & Gen-set Testing
-
Off-site Environmental and Altitude Testing
-
PLC Programming Center
-
Multiple Transport Options
-
Highway (I-74 & I-55 via I-155)
-
Air - (Peoria (PAI) & Bloomington (BMI))
-
Rail (Union Pacific)
-
Waterway (Marine Highway M-55)
-
Quality Certifications
-
UL 891 - Dead Front Switchboards
-
UL 508A - Industrial Control Panels
-
UL 1558 - Metal Enclosed Low Voltage Power Circuit Breaker Switchgear
-
UL Listed - Circuit Breaker and Metal-Clad Switchgear over 600 Volts
-
ISO 9001:2015 Third-Party Registered
MIL-SPEC Experience
MIL-C-5541 - Chemical Conversion Coatings on Aluminum and Aluminum Alloys
MIL-HDBK-454 - General Guidelines for Electronic Equipment
MIL-C-22750 - Coating, Epoxy, VOC
MIL-STD-1366 - Interface Standard for Transportability
MIL-STD-188 - Interoperability and Performance Standards for Medium and High-Frequency Radio Systems
MIL-HDBK-419 - Grounding: Bonding and Shielding for Electronic Equipments and Facilities
MIL-STD-209 - Department of Defense Interface Standard for Lifting and Tiedown Provisions
MIL-STD-810 - Environmental Engineering Consideration and Laboratory Test
MIL-STD-1472 - Human Engineering
MIL-STD-705 - Mobile Electic Power Systems
MIL-DTL-38999 - Contractors, Electrical, Circular, Miniature, High-Density Quick Disconnect (Bayonet Threaded, and Breech Couplings), Environment Resistant Removable Ceimp and Hermetic Solder Contacts, General Specification.
MIL-HDBK-1784 - Mobility, Towed, and Manually Propelled Support Equipment
MIL-DTL-83528 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI
MIL-STD-130 - Identification Marking of U.S. Military Property
MIL-STD-461 - Electromagnetic Interference Characteristics Requirements for Equipment
MIL-HDBK-784 - Guidelines-Design to Minimize Contamination and to Facilitate Decontamination of Military Vehicle and other Equipment: Interiors and Exteriors
MIL-STD-464 - Interface Standard: Electromagnetic Environmental Effects, Requirements for Systems
MIL-HDBK-1791 - Designing for Internal Aerial Delivery In Fixed Wing Aircraft
MIL-PRF-22750 - Performance Specification: Coating, Epoxy, High-Solids
MIL-STD-882 - System Safety
Primary NAICS Codes
238210 - Electrical Contractors and Other Wiring Installation Contractors
335311 - Power, Distribution, and Specialty Transformer Manufacturing
335313 - Switchgear and Switchboard Apparatus Manufacturing
335314 - Relay and Industrial Control Manufacturing
335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing
532490 - Other Commercial and Industrial Machinery and Equipment Rental and Leasing